November 2019 - GSM Edge | Free Exclusive and Premium Firmware.

Hot

Monday, November 11, 2019

OxygenOS 10 Q For Pocophone F1 Beryllium From Oneplus 6 Flash Guide

November 11, 2019 0
In this post, i am going share the very early builds of OxygenOS 10 Q For Pocophone F1 Beryllium. As you all might know OxygenOS is the stock rom of Oneplus devices. OxygenOS is one of the best and smooth custom android skin, which also nearly looks like the stock Android skin but better. So, this post is only for the Xiaomi Pocophone F1, if you tried to flash it in other devices, you will end up bricking your device. In the post below is some brief information about the rom iteself, bugs, and flashing guide in simple steps. So lets get started.

Everyone would be wondering if the rom is any usable and how stable is it. Therefore below is what's perfectly working and what is not working on this rom.
So everything that works are working without any issues.
Wifi
VoLTE
Camera
Torch
Dark mode
Customization
Ambient display
etc
Not working or bugs.
Hotspot does not enable
Bluetooth
And no face unlock

Now lets move on to the part where we actually flash OxygenOS 10 on our Beryllium. But before that,

Things you should know before flashing OxygenOS 10 Q For Pocophone F1 Beryllium
  • Your device should have unlocked bootloader
  • I am assuming you have TWRP installed
  • You should be on 10.3.8.0 firmware (91MB) (Flash using TWRP)
  • Magisk is already included in the rom
  • GCam is preinstalled

And that's all. Links are all at the end of this post.

Now assuming you have TWRP already installed, lets get flashing.
  • Copy the downloaded rom files (3 parts zip of rom and 1 firmware zip)
  • Boot into TWRP or whatever custom recovery you using
  • Wipe everthing including Dalvik, Cache, Data, Internal storage, System etc
  • Goto to install tab and first flash 10.3.8.0 firmware (91MB) zip if not already
  • Now install the rom zips one by one according to numbers
  • After flashing is complete reboot to system
  • And we are done.

Download OxygenOS 10 Q For Pocophone F1 Beryllium From Oneplus 6 

OOS-Q-SemiStable-Poco-zip-1_of_3.zip (1.4 GB)
OOS-Q-SemiStable-Poco-zip-2_of_3_v2.zip (324 MB)
OOS-Q-SemiStable-Poco-zip-3_of_3.zip (15 MB)

10.3.8.0 firmware (91 MB)

Screenshots:

 
Read More

Thursday, November 7, 2019

Samsung A10 SM-A105F Eng Modem File

November 07, 2019 1
In this post i am going to share Samsung SM-A105F eng modem file with you. If you are looking for eng modems files then you probably know what, and why we need eng modem file. But in case if you dont know anything about it i am gonna make it clear to you in some minutes. So this post is strictly for Samsung A10 SM-A105F and if you tried to flash this file on devices other than this, i am not gonna be responsible for what might be the outcome. Now without any delay lets get to the main point of our post.

What and why to flash Samsung SM-A105F eng modem file ?

If you know the answer then its your need but don't then i am going to tell you. So basically eng modem file is for unlocking network locks and repairing network issues on a Samsung device. Yeah you heard it right. Eng modem can unlock network locks which are implemented by network operators on your device. After applying eng modem on your device, you will be able to use whatever carrier you want as your operator. Also if you modem partition is damaged and no network is being supported on your device then this file will surely save you some bucks if you flashed it correctly.

How to flash Samsung SM-A105F eng modem  file ?

  • Install Samsung drivers
  • Open odin
  • Select the eng modem file on CP button
  • Put phone into download mode
  • Press Volume down and power key same time for download mode
  • Insert USB cable, phone will show up on odin
  • Click on start
  • After finishing phone will reboot
  • And you are done.

Samsung  SM-A105F eng modem file Information:
Model:  SM-A105F
File name: A105FXXU2ASF2_ENG_modem_BoxWares.tar.md5
Size: 35.21 MB
Version: A105FXXU2ASF2


Download Samsung SM-A105F Eng Modem File

And now you know about Samsung SM-A105F eng modem file and the use of eng modem file. If you think i was able to help you in anyway, or if you enjoyed my post, i would love to hear from you. Any kind of suggestions or advice is always welcomed. Leave a comment below i will definetaly reply.
Read More

Wednesday, November 6, 2019

Oppo A5 (2020) CPH 1931 Password Pin Reset File

November 06, 2019 9
Hello there, once again we are at it. Today we have brought you the Oppo A5 (2020) CPH 1931 password, pin reset flash file here on this post. We provide free support and solutions for mobile repairing, so be sure to visit us regularly. By any chance if you have forgotten your device's lock code then this is your day. I mean not entirely but we are here to get you out of that misery. OK so without further ado lets dig into the solution.



The device we are talking about today is Oppo A5 (2020) and the issue is about forgotten password or pin. The solution simply is to clean flash the firmware. By doing so the user data partition will be erased and your locks will be removed. The file which we are talking about is the official firmware of Oppo A5 (2020) which is obtained from official Oppo service center FTP service. And that means there wont be any risk of your device being hard bricked. Here is the link for that file.

Download Oppo A5 (2020) CPH 1931 Password Pin Reset Flash File

The above file can fix a lot of issues along side resetting user locks which was forgotten. Flashing this firmware will actively fix stuck on logo, constant rebooting, lagging device and much more. This file can only be flashed via official Oppo flashing tool, which is also provided by Oppo itself. You will need to follow this basic guide to successfully flash it on your device. Below are some simple steps to perform the task.
  • Extract the downloaded zip file
  • Run the Oppo MSM Tool.
  • Use your login info to get flash interface
  • Load the firmware on tool if not already
  • Turn off your phone
  • Press both volume keys and connect to PC
  • After detecting phone click on Start
  • After flashing is done reboot your device
  • Done.
Like this you should be able to flash without faceing any kind of issue. If you encounter any problems just let me know in the comments, i will gladly help you. Also show some support by liking our Facebook page at least comment. I really hope that my posts are helping someone even if its only one person.

Read More

Samsung SM-N975F Touch Not Working Fix Firmware

November 06, 2019 0


Ahh !! Another day, another issue exists and we got the solution for you. We are talking about Samsung SM-N975F Touch Not Working Fix Firmware here. So guys lets keep it rolling here. Today we will be talking about how we can fix the touch not responding problem on the all new Samsung Note Plus, while updating the software security patch. I can assure you that this the last stop for your huge issue, which is not that huge to be honest or in my opinion. So why are we waiting and for what?

So, a little background on this new issue we got here. Some days ago, last Sunday to be exactly, i got a device which we needed to replace the display because it was broken. After we done doing our thing, you know just replacing the digitizer. We got a weird problem, and that was this new touch not working. We thought it might be damaged beforehand so we went to replace it again, but again the same results, wait what, i was like that. Then we felt like we had a deja vu, and remembered that it was the same old problem with this new cloth. And that's how we figured it out. Now lets head to main point and the reason why you are here. To get the touch fixing firmware and the way to flash it on your device.

A little side note, even if you have not the exact issue as this posts title says, we know that you ain't here just to read our rubbish post and waste your time (HA... HA... HA...). Yeap you got it right. This file is also able to fix other software related problems. Below are some of those issues but they ain't limited to that.
  • Fix DRK
  • Remove rootkit/malwares
  • Fix custom binary blocked by FRP
  • Stuck on recovery mode/download mode
  • Fix touch not working
  • Fix software upgrade encountered a problem
  • Fix Kies mode Stuck
Now that we known some common issues it can handle lets move on to the part where we will guide to flash it on your device step by step. If you got into any kind of confusions or faced any other new issues just let me know on the comment. You know i will be watching you (Hmmmm).
  • Grab Odin and the firmware from links below
  • Extract the firmware and Odin
  • Put your device into download mode (you know, right?)
  • Load the firmware on AP button of Odin
  • Connect your device with USB cable
  • After device is shown on Odin
  • Press on start button.
  • It will take some time
  • After completion your device will reboot
  • And you touch will breath again
Small tip: Use 7-zip to extract the firmware, Winrar doesn't support the 7z format. As i have always said Winrar is for weaks anyway.

Download Samsung SM-N975F Official Firmware

Alright like always now, lets get to the point where you will be commenting and telling me about your thoughts on this post. If got any advice or want to pour a lot of angry expressions, all are welcome. So Keep then raining and gotta go bye.
Read More

Lenovo a7000 Dead Solution With Official Firmware

November 06, 2019 0
 

Hello there, we provide all kind of software solutions with 100% working firmware. So, be sure to check the rest of our posts. Today in this post we will be talking about how we can fix the hard bricked Lenovo a7000 which we caused or corrupted firmware or any kind of other negligence while performing this sensitive task. Anyway so today we are here to fix that device of yours. So without any talking lets get to work. 

So to fix our device we will need to know exactly what kind of symptoms we are getting, and we had done to achieve (pun intended) this kind of issue. You should note that if your device is not turning on and at the same time only vibrating while trying to power it on. I mean even if your device is dead, it should at least give a little vibrate response while trying to turning it on. If this is the case, follow the rest of the post without any worries.

This flash file will not only fix your hard bricked device but it also should be able to remove all kind all user locks including face lock if any such feature was set. Anyway below are some of the issues it can solve.
  • For sure hard brick fix / dead vibrate only fix
  • Reset user locks including fingerprint and face lock
  • Fix black or white only display issue
  • Reset FRP lock
  • etc
OK, now you should have gotten the slight power of this firmware, now we will move on to the next step. The one for which you are hopelessly reading the above rubbish (lol, xD). Below is the way to get your firmware and also the way to apply it on your device successfully fixing it.

Lenovo a7000 Dead Solution Firmware Flashing Steps

First things first, get the firmware using the below link and as usual follow these steps.
  • Extract firmware and SP flash tool on a folder
  • Select the scatter file from firmware folder on tool
  • After firmware is loaded, select Format + Download
  • Now click on download, turn off your device
  • Insert USB cable and connect to PC
  • Flashing will start, will take some time
  • After completing successfully, take out the battery
  • Now the moment of truth, try to power it on
  • Annnnnd Voila ! Your device is fixed
Yeah take your time to appreciate me and my hard working, that has given you the power to fix your device without spending a penny. And now i will log off. See you soon on our next post, where i will be posting some good materials.

Yeah about the link totally forgot, get it down below.

Download Lenovo a7000 Dead Solution With Official Firmware (Use 7-zip, Winrar is for weaks, jk:) )

If you though i was punny on this post, consider supporting me by commenting below, or i am gonna get really furious. Anyway love you all.
Read More

Tuesday, November 5, 2019

Realme 3 Pro RMX1851 Flash file Firmware

November 05, 2019 0


In this post i am sharing the most demanded and important flash file which for the device Realme 3 Pro. The firmware i am sharing here is the official firmware file provided by the Oppo service center. Our site provides top notch guaranteed tested and working flash files. We try make our articles clean and straight forward as much as possible. Follow the below guide to successfully flash your device.

Lets take a brief tour on the device hardware. Realme 3 Pro is a device with dual camera with 16MP main shooter. It is powered by sd710 Soc from qualcomm and comes in 4/6GB of Ram and 64/128GB of internal storage respectively. It runs Android Pie out of the box and is planned to get Android 10. The device hardware looks pretty solid on paper and should easily handle heaving tasks such as gaming and multi-tasking. Now lets get to the main point of our article on get on to our flashing process.

Flashing Guide For Realme 3 Pro RMX 1851

  • Download the flash file from below
  • Extract the files in a folder
  • Run Oppo msm tool
  • Use your login info to login
  • Firmware is automatically loaded
  • Turn off your phone
  • Connect phone using USB cable whilst pressing both volume buttons
  • Phone will show up on com port list
  • Click on Start and wait some time
  • And flashing is done.
The firmware i am sharing here are all tested and working. So don't be in any kind of unnecessary doubts. Below are some of the firmware features that will help you to fix many kinds of software issues you are facing. So get a look at the below points and proceed.

Firmware features of Realme 3 Pro

  • Fix white display  
  • Fix dead vibrate only 
  • Reset user lock including pin, password, pattern etc
  • Fix stuck on logo/boot loop
  • Remove malwares and rootkits
  • Reset FRP lock etc.
Download Realme 3 Pro RMX1851 Flash file

Comment below if you need any kind of assistance.

Any kind of queries, comments or suggestions are welcomed. You can either comment below directly or mail us using the contact page on our site. Hope this article has helped, so please support us by sharing our article and leaving a comment.
Read More

Monday, November 4, 2019

Realme X CPH1901 Offical Flash file

November 04, 2019 0

This post will guide you to get the official firmware of Realme X and perform successful flashing of your device. Our site provides many different brands software and hardware repairing solution including this Realme brand. The firmware on this article i am sharing is obtained from the official FTP service of Realme and are all tested/working. This firmware will help you fix many software related problems including vibrate only which is cause by flashing wrong version of software on devices.

The firmware can only be flashed through official Realme flashing tool like on Oppo devices. If it's in your interest the Realme X is powered by Snapdragon 710 with various memory configurations. It runs ColorOS 6 on top of Android 9 Pie and is on the list to get Android 10.

Realme X CPH1901 Offical Flash file Uses

This flash file is able to solve all kinds of software related issues. By flashing this file you wont void your warranty and also if your device is bricked previously by flashing wrong file it will revive the device. Below are some common issues that can be solved by this file.
  • Reset user locks like pin, pattern, password
  • Fix boot loop and stuck on logo
  • Malware infections/rootkit
  • Vibrate only fix
  • White/black display etc.

Realme X CPH1901 Offical Flash file flashing guide

  • Extract the downloaded files in a folder on Desktop
  • Run Oppo MSM Tool.
  • Login using your credentials
  • Your firmware will be loaded automatically
  • Power off your phone
  • Connect phone using USB cable whilst pressing both volume buttons
  • Phone will be detected on flash Tool
  • Click on Start
  • After flashing is done
  • Reboot your device and all finished.
Download Realme X CPH1901 Offical Flash file

The above article with the flashing guide should be easily understandable to all novice and expert users. If you face any issues or any kind of other issues related to mobile repairing, do not hesitate to write us any time. If you think my article has helped you in any way, to show some support please comment or share our article.
Read More

Colors Elite E15 Official Flash File Free

November 04, 2019 0


Welcome, In this article i am going to share this very demanded firmware file that is colors elite e15 official flash file free of charge. You can get all brands firmware, unlock solutions and many more helpful articles about repairing mobile phones on this site. This post is about Colors Elite E15 and below is the link to get the official tested flash file form colors service center FTP service. Read thoroughly the article to successfully obtain and flash your Colors Elite E15 without getting any errors or bricking your device, So lets get started.

As in the case of this article's firmware, all my shared firmware are all working and tested so be assured that your device wont be bricked by flashing this firmware.  All you have to do is follow every step carefully and you will surely make it. Colors Elite E15 is a entry level device with massive 5000mAh battery, and you can expect other aspects of hardware to be very low end in this price segment. This firmware is for the 3G version of the device, so be careful and confirm that your device is the correct one.

This firmware is very useful to fix different kinds of software issues in Colors Elite E15. If you face any software related issues in your device like memory being full, phone being slow, boot loop issues or even hard bricked, you can simply flash this firmware and your device will be revived. Below are some of the issues you can fix via flashing this firmware.
  • White LCD issues
  • Dead after flash (hard brick)
  • Boot loop or stuck on logo
  • Apps not responding or not installing
  • PlayStore not functioning
  • Forgotten user locks such as pin, password, fingerprint
  • Malware infection etc.

Colors Elite E15 Flashing Guide

Like any other Mediatek soc based android devices you will need to install MediaTek VCOM drivers and use spflash tool to flash this firmware. Use the following steps to get your desired output.
  • Download and extract the files on a folder
  • Install MTK VCOM Driver
  • Turn off your device
  • Run Flash_tool.exe
  • Choose scatter file
  • Press on start on spflashtool
  • Press volume + and - at same time and connect to PC
  • Flashing process will start
  • Done
More detailed flashing guide here

Download Colors Elite E15 Official Flash File Free

Myself as a professional mobile phone technician who loves technology and to share solutions to all my friend so I hope you got help form my article, so some support and love by commenting below and share this post. If you show some support i will be motivated to share more premium free contents and write quality posts.
Read More

Sunday, November 3, 2019

Download Oppo A3s CPH1853EX Firmware Flash File All Version

November 03, 2019 0


Hola visitor, This article will get through a step by step guide to download different versions of Oppo A3s flash file and also on how to successfully flash it on your device without bricking your device. The firmware i am sharing here is the official firmware file provided the Oppo service center.  You will need special tool to flash it on your device which is also provided by oppo. The tool is bundled with the firmware so you dont need to download them separately. Enjoy this article and let me know what you think about this on the comments below. So lets get started.

Before you jump to the end of this article and get your desire, please be aware that there are two different model numbers of Oppo A3s. Confirm carefully yours one is CPH1853, else if you put this flash file on other version of the A3s, your device will brick and you wont be able to power it on. Lets take a brief tour on the device hardware. Oppo A3s is another budget device with dual camera from Oppo. It is powered by well known sd450 Soc from qualcomm and comes in 2/3GB of Ram and different configuration on internal storage. The phones lags and not quite the device you would want in that price range.

How to flash Oppo A3s CPH1853 (Flashing Guide)

  • Download the firmware from the given link below
  • Extract the files in a folder on Desktop
  • Run OppoMTKtool.
  • Login using your credentials
  • Your firmware will load automatically
  • Power off your phone
  • Connect phone using USB cable whilst pressing both volume buttons
  • Phone will be detected on Tool
  • Click on Start
  • And flashing is done.
The firmware i am sharing here are all tested and working. So don't be in any kind of unnecessary doubts. Below are some of the firmware features that will help you to fix many kinds of software issues you are facing. So get a look at the below points and proceed.

Flash Mediatek Soc Based Android Phones

Firmware features of Oppo A3s CPH1853FX

  • Fix dead vibrate only 
  • Remove user lock including pin, password, pattern, facelock
  • Fix stuck on logo
  • Fix boot loop issues
  • Remove root
  • Remove malwares and rootkits
  • Remove FRP lock
Get the firmware of all versions down below, good luck.

Download CPH1853EX_11_A.20_190105_350c4578

Download CPH1853_11_A.21_190315_c664beb5

Download CPH1853_11_A.22_190509_a6201972 (Coming Soon)

Any kind of queries, comments or suggestions are welcomed. You can either comment below directly or mail us using the contact page on our site. Hope this article has helped, so please support us by sharing our article and leaving a comment.
Read More

Oppo A1k CPH1923 Official Stock Firmware Get Here

November 03, 2019 0
 

Welcome visitor, you have landed this article because you are searching for Oppo A1k CPH1923 Official Stock Firmware to download and flash. And you are at very good and right place for that. This article will provide you to get the A1k flash file and then guide you on how to flash it on your Oppo A1k android device. Follow the below guide to successfully get what you desire.  So lets get started.

Before we get started remember that sometimes while flashing any tested or all working firmware you device could be not powering on but don't worry. Our firmware/flash file will revive your device in no time. This flash file can be used to remove all kind of user locks such as pin, pattern, password or even face id lock. This firmware wont make your device warranty void. Also this flash file can only be flashed using the official Oppo Flash tool so there is no chance that your device will brick. The flash file i am providing here also comes with official Oppo flash tool. So you dont need to download it separately.

A little on info on the device itself. A1k is powered by Mediatek MT6765 Soc with 2/3GB of ram and 32GB of internal storage. This device runs latest Android version Pie and is the most budget phone form Oppo ever. This article is all about Oppo A1k and only for it. So dont try to apply this flash file on other models else you will brick your device unrecoverable.

Oppo A1k Flashing guide

  • Download the tool bundled with fimware
  • Extract all the files on desktop
  • Run Oppo tool
  • Login with your Oppo credentials
  • Install Oppo drivers
  • Power off your device
  • Connect with USB cable whilst pressing both volume keys
  • Start flashing after your device is detected
  • It will take some time
  • Flashing done
Download Oppo A1k Official Stock Rom Firmware with Tool 

Any kind of queries, comments or suggestions are welcomed. You can either comment below directly or mail us using the contact page on our site. Hope this article has helped, so please support us by sharing our article and leaving a comment.
Read More

Oppo Reno2 F CPH1989 Firmware file Download

November 03, 2019 1
Welcome back guys, From this post you will get to know about Oppo Reno2 F and will also be able to download the stock rom or firmware file for your Oppo Reno2 F Android device. If you are  in search for Oppo Reno2 F, you are in the right place, at the end of the post you can get the official firmware file provided the Oppo service center. Use the below information to get an idea of the firmware.



Ok, so lets get know the device in brief, Oppo Reno2 F is one of the latest upper-mid tier Android phone form Oppo. It comes with Android 9 (ColorOS 6.1) out of the box with 8 and 128GB of Ram and Rom respectively. It offers 6.5" AMOLED display with 1080*2340 pixel of resolution. It sports Mediatek's latest powerful Helio P70 Soc with 48MP main rear camera.

As usual all firmware on my site, that i share, are all tested and working without any doubt. You will need special tools to flash this firmware on your device, which is provided by the Oppo itself. You can flash this firmware using Oppo MTK flashing tool, which is bundled with the firmware. So when you download the firmware you will also get the flashing tool. All you need to do is download and extract the firmware somewhere on a folder and run the tool. Then the tool will automatically load the firmware and wait for the device to show up on port list. The below steps will guide you briefly to successfully flash this firmware on your device.

Oppo Reno2 F Flashing Guide:

  1. Download the firmware from the given link below
  2. Extract the files in a folder on Desktop
  3. Run OppoMTKtool.exe
  4. Login using your credentials
  5. Your firmware will load automatically
  6. Power off your phone
  7. Connect phone using USB cable whilst pressing both volume buttons
  8. Phone will be detected on Tool
  9. Click on Start
  10. And flashing is done.
Download Oppo Reno2 F Firmware File (Comming Soon) 

Any kind of queries, comments or suggestions are welcomed. You can either comment below directly or mail us using the contact page on our site. Hope this article has helped, so please support us by sharing our article and leaving a comment.
Read More

Unified - How To Flash Mediatek SoC Based Any Android With SP Flash Tool

November 03, 2019 0
Hola everyone, today i am making this very demanded and useful post which will help any novice user to flash on Mediatek SoC Based Any Android With SP Flash Tool. Please be aware that in this process, if any step is repeated wrongly, you can hard brick your device and will never be able to fix. So bear with me everyone and lets follow me on this step by step tutorial. Its easy yet you have to remember some options so don't get lost and follow me carefully. I am gonna guide in six simple step on how to use SP Flash Tool. So lets get started.

Step 1: Download And Install Mediatek VCOM Driver

First of all download and install the Mediatek VCOM port driver, which is needed by the windows to recognize your device in flashing mode.
Mediatek VCOM Driver Only 
Mediatek VCOM Driver With Full Install Guide

Step 2: Download And Extract Firmware and SP Flash Tool 

In this step we will download the device specific firmware and the tool to flash the firmware. Extract the downloaded files somewhere you can get easily to.
SP Flash Tool
 

Step 3: Run SP Tool and Load Firmware using Scatter File

Now, go to the extracted files folder and find flash_tool.exe and run it. If all dependencies are satisfied and there are no issues you should get a window like below.
After that go to Download tab and click on Scatter-loading file to load the scatter file which is located in the firmware folder. Select the scatter file from there.




 

Step 4: Choosing What to Flash and Format

Usually we will just select Format All + Download option and flash our firmware. But there are times when we have to use Download Only option and uncheck the PRELOADER option just to be sure that our phone wont die because of unmatched software versions on phone and flash one. After that press on Download Button with connecting your device.


 

Step 5: Putting Device In Flash Mode And Flashing

And now the time to plug our device on PC using a data cable. First take out the battery and insert it again. Connect your device with USB whilst pressing the Volume + button. Your flash tool will detect your device and start flashing.

 

Step 6: Flashing Done And Rebooting Phone

At last, If your device is flashed successfully you will get a green checked logo on a dialog. And That's all.
Read More