Ahh !! Another day, another issue exists and we got the solution for you. We are talking about Samsung SM-N975F Touch Not Working Fix Firmware here. So guys lets keep it rolling here. Today we will be talking about how we can fix the touch not responding problem on the all new Samsung Note Plus, while updating the software security patch. I can assure you that this the last stop for your huge issue, which is not that huge to be honest or in my opinion. So why are we waiting and for what?
So, a little background on this new issue we got here. Some days ago, last Sunday to be exactly, i got a device which we needed to replace the display because it was broken. After we done doing our thing, you know just replacing the digitizer. We got a weird problem, and that was this new touch not working. We thought it might be damaged beforehand so we went to replace it again, but again the same results, wait what, i was like that. Then we felt like we had a deja vu, and remembered that it was the same old problem with this new cloth. And that’s how we figured it out. Now lets head to main point and the reason why you are here. To get the touch fixing firmware and the way to flash it on your device.
A little side note, even if you have not the exact issue as this posts title says, we know that you ain’t here just to read our rubbish post and waste your time (HA… HA… HA…). Yeap you got it right. This file is also able to fix other software related problems. Below are some of those issues but they ain’t limited to that.
- Fix DRK
- Remove rootkit/malwares
- Fix custom binary blocked by FRP
- Stuck on recovery mode/download mode
- Fix touch not working
- Fix software upgrade encountered a problem
- Fix Kies mode Stuck
Now that we known some common issues it can handle lets move on to the part where we will guide to flash it on your device step by step. If you got into any kind of confusions or faced any other new issues just let me know on the comment. You know i will be watching you (Hmmmm).
- Grab Odin and the firmware from links below
- Extract the firmware and Odin
- Put your device into download mode (you know, right?)
- Load the firmware on AP button of Odin
- Connect your device with USB cable
- After device is shown on Odin
- Press on start button.
- It will take some time
- After completion your device will reboot
- And you touch will breath again
Small tip: Use 7-zip to extract the firmware, Winrar doesn’t support the 7z format. As i have always said Winrar is for weaks anyway.
Alright like always now, lets get to the point where you will be commenting and telling me about your thoughts on this post. If got any advice or want to pour a lot of angry expressions, all are welcome. So Keep then raining and gotta go bye.